Electrostatic Spray Integrated Converter

Jiangsu Tianwang Solar Technology Co., Ltd. is one of the leading electrostatic spray integrated converter manufacturers and suppliers in China. Please feel free to buy or wholesale high quality products for sale here from our factory. Customized orders are welcome.

Electrostatic spray integrated converter is available to turn a normal sprayer into electrostatic.

Electrostatic atomizer refers to a atomizer that can make the aerosol droplets emitted produce significant encircling adsorption effect on the target (national registration -2020-A-01059391).

Small electrostatic sprayer is the world's first high-tech product developed by Jiangsu Tianwang Solar Technology CO.,LTD. with independent intellectual property rights. It is protected by a number of national patents (ZL 2015 2 1136117.9, 2020 2 2216810.4, ZL 2019 3 0661020.7).It is small and exquisite. It integrates lithium battery, high voltage electrostatic generator, liquid direct contact charging electrode, human conduction grounding electrode, power booster module, switch control circuit, working indicator and sprayer handle in one body. With special spray rod, nozzle and nozzle, it can easily match and connect with most of the ordinary manual, electric and motorized sprayer in the world. Make the ordinary sprayer of water, medicine, energy and money into water, medicine, labor and money saving electrostatic sprayer, which can greatly reduce the use of pesticides, reduce agricultural costs, improve the prevention and control effect, protect the environment, reduce pesticide residues of agricultural products, improve the quality and grade of agricultural products, to ensure the safety of agricultural products.The advent of electrostatic fogging machine marks that plant protection will truly enter a new era of electrostatic spray.

Structures pecification:

Instructions for use:
1.The new machine should be charged before use so that the battery is fully charged.
2.After each use,it should also be charged in time to make up the electricity.
3.When the machine is not used for a long time,the battery should also be charged once a month for maintenance,so as not to damage the battery due to too low voltage.
4.The charger configured should be used for charging.
5.Connect the liquid output hose of the electric sprayer to the liquid input end of the electrostatic spray converter,and tighten the nuts to prevent liquid leakage.
6.Install an insulating spray rod and the nozzle and nozzle connected to the spray rod on the liquid output end of the Electrostatic spray integrated converter,and tighten the nut to prevent liquid leakage.Non-insulated spray rods such as metal are strictly prohibited.

7.Put the sprayer on your back,start the sprayer switch first,then press the Electrostatic spray integrated converter workingswitch (the red indicator light will be on),and hold the body with your hand to creat electrostatic spray. (Note that the electrostatic adsorption effect may be affected if the sprayer is placed on the ground for spraying)
8.The proportion of liquid medicine:according to the principle of about 80% water saving and about 50% medicine saving than ordinary sprayer, such as the original 100 grams of pesticide per mu of land, now just use about 50 grams; The original mu of land such as 16 liters of water, now a mu of land as long as about 4 liters of water on the line.
9.Turn off the switch of the Electrostatic spray integrated converter before turning off the power switch of the ordinary sprayer.
10.Do not touch the power switch and charging socket of the electrostatic fogging machine during the process of electrostatic spraying to avoid electrostatic stimulation.
11.Some Small electrostatic sprayer using pressure water pump may not be suitable for electrostatic spray converter due to the setting of pressure parameters.(Note that the pressure of the sprayer pump should be less than 4.5kg)
12.Attention should be paid to keeping the surface of the spray converter clean and dry regularly to ensure the normal and safe use of the machine and extend the service life of the machine.

13. People with serious heart disease or mental illness, drunk people, minors, nursing or pregnant women, the elderly and incapacitated, people who are not fit and have no knowledge of operation are prohibited to use this machine.

14. In the process of spray, in case of any mistake in the eyes or mouth, please rinse with clean water or seek medical attention in time.

15. Before the operation, pay attention to check whether the infusion hose and insulation spray rod are properly connected and tightened with the electrostatic spray pistol, whether the electricity is sufficient, and whether the nozzle and nozzle are tightly tightened and not loose. After confirming that there is no anomaly, the switch can be started for electrostatic spraying.

16. Because of the good encircling adsorption effect after spraying with electrostatic spray pistol, there is no need to repeat spraying on the target during spraying operation, so as to avoid the waste of liquid medicine by excessive spraying, which will not only waste funds, but also reduce the speed of operation.

17. The electrostatic spray pistol is equipped with tens of thousands of volts of electrostatic high voltage components. Therefore, it is forbidden to disassemble and install the machine without permission, so as to avoid electric shock and damage to the internal structure of the machine. If maintenance is required, please refer to professional technicians for handling.

Proper usage guide:

it has a series of advantages of water saving, medicine saving, high efficiency and money saving, and, as long as the correct operation, it is completely comfortable and safe. There will be no leakage of electricity and numbness. Therefore, correct operation usage is important. So how do you get it right? In fact, it is very simple, screw, wipe, back, do not touch.

1, Screw, refers to the rubber hose and the handle (electrostatic spray pistol) at the joint of the nut screw; Be sure to tighten the connection between the spray rod and the handle (electrostatic spray gun) so that the high voltage electrostatic charge inside the charged liquid in the pipeline can not escape to irritate the human skin.

2, Wipe clean, refers to the electrostatic fogging machine barrel outside the surface of the water dry, to the Small electrostatic sprayer barrel outside the surface of the dirt, especially the barrel nozzle inside and outside the part of the dirt must be removed, so as to completely eliminate the accumulation and conduction of static charge outside the barrel surface.

Note: The surface of the bucket must be cleaned of water and dirt

3, On the back of the body, refers to when opening the electrostatic fogging machine for spraying operations, it is necessary to put the Small electrostatic sprayer on the back of the body, so that on the one hand, it is easy to operate, more important is to avoid the base placed on the ground damp and affect the adsorption effect, and at the same time to eliminate the phenomenon of static charge leakage.

Always carry the sprayer on your back when spraying

4, "Do not touch" means that during the working process after the sprayer is opened, do not touch the metal contacts and ionization electrodes of the charging socket on the machine with your hands at the same time, so as to avoid electrostatic stimulation. At the same time, the operator do not have physical contact with others, so as to avoid the instant release of static electricity and bring discomfort to people.

Also, be sure to charge the sprayer frequently. In addition to timely charging after the sprayer work, even if the sprayer does not work for a long time, it is necessary to carry out a maintenance charging of the sprayer within 2 months, so as to avoid the battery is too low and damage the battery, affecting the service life of the battery.

technical specification

Hot Tags: electrostatic spray integrated converter, China, suppliers, manufacturers, factory, customized, wholesale, buy, for sale