The high frequency electronic transformer produced by Tianwang high voltage transformer manufacturer has an oscillation frequency of up to 20KHZ. Adopt epoxy resin vacuum encapsulation, good insulation performance. Temperature-resistant, moisture-proof, shock-resistant and flame-retardant. It can be applied to plasma circuit, beauty instrument, electronic ignition, etc.
High frequency electronic transformers are power transformers whose working frequency exceeds the intermediate frequency (10kHz). According to the working frequency and the frequency level, they can be divided into several grades: 10kHz- 50kHz, 50kHz-100kHz, 100kHz～500kHz, 500kHz～1MHz, and above 1MHz, but Many people don't understand. After 30 years of research on high frequency transformers by Jiangsu Tianwang high voltage transformer supplier, they have come to the working principle of high-frequency transformers.
A transformer is a device that transforms AC voltage, current, and impedance. When an AC current is passed through the primary coil, an AC magnetic flux is generated in the iron core (or magnetic core), causing a voltage (or current) to be induced in the secondary coil.
High frequency electronic transformer consists of an iron core (or magnetic core) and a coil. The coil has two or more windings. The winding connected to the power supply is called the primary winding, and the remaining windings are called the secondary winding.
The transmission power is relatively large, the working frequency is relatively low; the transmission power is relatively small, the working frequency is relatively high. In this way, there are differences in operating frequency and transmission power, and it should be self-evident that the design methods of power transformers with different grades of operating frequency are different.
After the editor's explanation, do you know about high frequency electronic transformers? If you have any questions, you can leave a message for consultation.
