First prepare the following materials: high voltage arc transformer, battery, control panel, arc plasma lighter shell, ceramic head, screws, etc. Every material needs to be tested.
1. Weld the electric lighter module,battery and control panel together.
2. After making sure all solder joints are solid, the arc igniter cable is routed through the hose to the head of the hose. 3. After the buttons of the lamp and switch are placed in the corresponding position, the control panel and the battery are placed in place, and the control panel is fixed in the position with screws.
4. Install the ceramic head and ignition cover and screw it down.
5. After adjusting the position of Arc Lighter Transformer, check the lamp, charge, arc ignition is in good condition, and finally cover the plastic cover.
6. Inspectors repeatedly test, after kitchen lighter passing the test,fully charge, packing .
High voltage arc transformer are available at this link：Jiangsu Tianwang Solar Technology Co., Ltd. - High Voltage Generator, Igniter (alibaba.com)
