Hall-type contactless electronic ignition system, which consists of distributor, signal generator, igniter, high-energy ignition coil, high-voltage wire, spark plug, etc. The Hall signal generator is made according to the principle of Hall effect, and it is installed in the distributor. Hall signal generator, which is composed of trigger impeller 1 and Hall sensor 4. The trigger impeller, like a traditional distributor cam, is sleeved on the upper part of the distributor shaft.
It can rotate with the distributor shaft and can rotate a little relative to the distributor shaft to ensure the normal operation of the centrifugal adjusting device. The utility model provides an electronic igniter, which is characterized in that a shell with an ignition port on the left end and a button port on the top, and an ignition tube connected to the ignition port at the left end of the shell is fixedly connected to the button port. The ignition device is composed of a cable connected to the ignition device. The ignition device consists of a rectangular shell, a button that is slidably connected to the upper end of the shell, a striker connected to the bottom of the button, and a power-generating ceramic that is fixedly connected to the bottom of the shell A block, a thimble connected to the upper surface of the power-generating ceramic block, and a spring that abuts on the power-generating ceramic block and sleeves the thimble.
